Characteristics of Allergic Harvest PC

  • -

Characteristics of Allergic Harvest PC

Category : greenhouse

The whole set for the construction of a 4-meter greenhouse 3 sheets of cellular polycarbonate in the shape of rolls of 2.1 m in length and a diameter of 60-90 cm. The depth of this substance is 4 mm.

If you want, you are able to increase the amount of the construction to 6 yards or longer. To do this, it's sufficient to join a two-meter extension. When choosing a drawing, then pay attention to the space between the arches. This figure should be 65 cm, and that's the most appropriate length for the specified thickness of this substance. The diameter of the doors based on the producer's drawing is 90 cm.

Before assembling a polycarbonate greenhouse, then it is necessary to choose a location for the location. If this is done correctly, you can provide yourself with a crop of fresh vegetables for the entire year.

The place for your future greenhouse is marked immediately at the preparation of the garden plot. To be able to melt the snow at the positioning of their greenhouse as early as possible, the best point on the site is going to be a slight elevation. Moreover, in this location is not going to need to be concerned about substantial humidity as soil and air in the structure.

Build a polycarbonate greenhouse on a raised site - intends to care for the optimal temperature inside.

When it isn't possible to put a greenhouse on an elevated place, you will need to pour a coating of fine shattered rock around 20 cm and the same layer of fertile soil to make seedbeds.

Before assembling a greenhouse on your backyard plot, you should also think about where and how this construction will be installed. First, you must choose a place for it. The greenhouse ought to be found in a well-lit area no less than a few meters away from homes, barns and other structures.

How to install a greenhouse in Line with the Surfaces of the Planet gidpostroy.ru

Be sure to measure the soil surface - it is ideal to even remove the top layer. This will also eliminate weed seeds. And for ease of work, remove the soil in a place that is about a meter wider on each side of the rectangle you desire.

It's also worth considering having a base. As producers say, now most greenhouses don't need that, particularly if they (greenhouses) are used just in the spring and summer period. However, experienced gardeners still recommend earning an elementary foundation from a pub. It's quite simple - it is enough to associate with each other using metal corners and screws four parts of timber with a cross-section of at least 10 * 10 cm. The size of such a base ought to be equivalent to the foundation of their upcoming greenhouse.

Simple bar foundation

You may even create a strip base of concrete. He's more dependable than a bar foundation, but requires more fiscal and labor expenses. By the way, the greenhouse, that will be used in winter, without it and do not do without it whatsoever.

Stages of the formation of a strip base: a schematic representation

Many producers advise to install greenhouse structures without even building a base. Even for this purpose, they equip the framework with special T-shaped legs, so that the structure was firmly fixed. But, as practice shows, it's still crucial to construct a foundation: therefore and the foundation will be more securely fixed and also the components of the foundation in contact with the ground, will be stored much longer in its initial state.

The main thing is to deal with the material with specific agents to protect the wood from moisture. The material is generally installed on concrete blocks that are dug into the ground. For a six-meter arrangement, they need 10 bits: four on each side and one at the center of the endings.

Before you perform the greenhouse itself, you will need to pick the ideal spot for it. It has to be an even site, so the framework was found equally, without distortions. It needs to be bright and not obscured by trees or buildings.